変更履歴

uboot-mediatek: CMCC RAX3000M: add Airoha AN8855 switch support

This commit adds support for Airoha AN8855 switch. Some CMCC RAX3000Me hw
revisions are shipped with Airoha switch.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19760
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: fa5e551)

uboot-mediatek: CMCC RAX3000M: add ddr3 build

This commit adds ddr3 build for the ddr3 variant of the CMCC RAX3000Me
router.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19760
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: bf55d2f)

arm-trusted-firmware-mediatek: add FudanMicro manufacturer

Add FudanMicro manufacturer.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19760
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 863a594)

uboot-mediatek: add support for FudanMicro FM25S01A

This patch adds support for FudanMicro FM25S01A SPI NAND. It's required
for some CMCC RAX3000Me hardware revisions.

The patch was partially taken from ImmortalWrt.
Link:
https://raw.githubusercontent.com/immortalwrt/immortalwrt/refs/heads/master/package/boot/uboot-mediatek/patches/342-mtd-spinand-Support-fmsh.patch

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19760
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: ee2fae2)

kernel: add support for FudanMicro FM25S01A SPI-NAND

Add support for FudanMicro FM25S01A SPI NAND.
Datasheet: http://eng.fmsh.com/nvm/FM25S01A_ds_eng.pdf

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
[add lore.kernel.org link to the patch files]
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19760
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: a140bcb)

mediatek: CMCC RAX3000M: add RAX3000Me as alt model

The devices are basically identical. The RAX3000Me can be with
ddr3 RAM.

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19760
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 23f016c)

zynq: refresh config

This was done by executing these command:
$ make kernel_oldconfig CONFIG_TARGET=platform

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/19969
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 6be2c7f)

zynq: disable unused Vitesse PHY

All devices supported by the Zynq target have either a Realtek or Marvell
PHY. The Vitesse PHY was enabled when the target was created (2d45ad07fc64).
It's not used here, so it's safe to disable it.

Ethernet PHYs used by individual devices are listed below.

Device			PHY
AVNET ZedBoard		Marvell 88E1518
Digilent Zybo		Realtek RTL8211E
Digilent Zybo Z7	Realtek	RTL8211E or RTL8211F
Xilinx ZC702		Marvell 88E1116R

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/19969
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: ea002c0)

mediatek: filogic: add support for ipTIME AX3000M

ipTIME AX3000M is an 802.11ax (Wi-Fi 6) router, based on MediaTek
MT7981B. (Filogic 820)

Specifications:
* SoC: MetiaTek MT7981B
* RAM: 256MiB
* Flash: ESMT SPI-NAND F50L1G41LB 128MiB
* Wi-Fi:
  * MediaTek MT7915E: 2.4GHz and 5GHz
* Ethernet: 5x 1GbE
  * Switch: MediaTek MT7531
* USB: 1x 3.0
* UART: J4 (115200 baud)
* LED:
  * PWR: VCC
  * CPU, 2.4G, 5G: GPIO
  * LAN 1-4, WAN: Controlled by Switch

MAC Addresses:
* 2.4G, 5G: B0:XX:XX:04:2A:60 (factory 0x4)
* WAN: B0:XX:XX:04:2A:61 (factory 0x4, +1)
* LAN: B0:XX:XX:04:2A:63 (factory 0x4, +3)

MTD Partitions:
* 0x000000000000-0x000000100000 : "BL2"
* 0x000000100000-0x000000180000 : "u-boot-env"
* 0x000000180000-0x000000380000 : "Factory"
* 0x000000380000-0x000000580000 : "FIP"
* 0x000000580000-0x000007380000 : "ubi"

UBI Partitions (Dynamic):
* id: 0, kernel2
* id: 1, kernel
* id: 2, rootfs
* id: 3, rootfs_data
* id: 4, rootfs2

Installation:
* Upload factory image through the tftp recovery mode.

Notes:
* This device has a dual-boot partition scheme, if installing with the
stock web interface method will flash only on the inactive ubi partitions
which are kernel and rootfs, newly flashed kernel didn't know the proper
rootfs partition so the booted kernel will panic.

Tested-by: Rhnn Hur <hurrhnn@icmp.kr>
Signed-off-by: Rhnn Hur <hurrhnn@icmp.kr>
Link: https://github.com/openwrt/openwrt/pull/16643
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: cefb814)

rockchip: refresh and reorder patches

- Replace NanoPi R3S patch with upstreamed version
- Merge NanoPC T6 mmc fixes patches
- Reorder patches to start from 001

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/19925
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 3735317)

rockchip: backport GATE_LINK support for RK3588

Apart from improved power consumption, this fixes the runtime errors
from the pmdomain driver (failed to set idle on domain '%s')

Backport four clk fixes while at it.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/19925
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 13db7a0)

build: Add compatibility with uutils' coreutils

Add support so openwrt can be compiled using
coreutils from GNU or uutils.

Signed-off-by: Marcos Alano <marcoshalano@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19883
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 67345ea)

package/libs/elfutils: fix license

elfutils libraries are not licensed under GPL-3.0-or-later, they are dual
licensed: GPL-2.0-or-later OR LGPL-3.0-or-later as clearly stated in
source files as well as on https://sourceware.org/elfutils:

The libraries and backends are dual GPLv2+/LGPLv3+. The utilities are GPLv3+.

Fixes: b98fb7664639a814f3dba309eaf38b62be137bb8 (elfutils: import package from packages.git)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19941
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 9a157b5)

package/libs/gettext-full: fix license

gettext-full only provides libintl which is not licensed under
GPL-3.0.-or-later but under LGPL-2.1-or-later as stated in
gettext-runtime/intl/COPYING.LIB

Fixes: c10d97484a43375a0446dafc8cb4072e26502f37 (Add more license tags with SPDX identifiers)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19943
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 13e10bb)

libxml2: Add abi version

The version of libxml2 was bumped from 2.13.6 to 2.14.5. Since version
2.14, libxml2 is not binary compatible with older versions. Therefore
add an abi version.

From the NEWS file:
Binary compatibility is restricted to versions 2.14 or newer. On ELF
systems, the soname was bumped from libxml2.so.2 to libxml2.so.16.

Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
Link: https://github.com/openwrt/openwrt/pull/19983
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 420be05)

rockchip: increase the number of serial ports for rk35xx

The RK356x/RK3588 SoCs support up to 10 serial ports.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/19917
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 672e45e)

airoha: backport upstream fixes for pinctrl PHY LED and MDIO

Backport fixes for Airoha pinctrl driver for PHY LED and MDIO bus. This
fix a copy-paste error for PHY LED and a misconfiguration for MT7530
embedded Switch MDIO bus GPIO pin to permit usage of external PHYs.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 (commit: 35ff70e)

uboot-sunxi: randomize ethaddr on Olimex A20 boards

While these boards have an at24 EEPROM for storing the MAC address,
early revisions (up until about 2017) did not contain actual addresses.
Create a random address to have ethernet function properly in u-boot.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
 (commit: 9fae84e)

sunxi: enable at24 support

Certain boards have an at24(-compatible) EEPROM for storing various
parameters like MAC addresses. Enable support for this hardware across
the whole target.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
 (commit: cd394b4)

bcm2712: add kmod-r8169 and kmod-usb-net-rtl8152

Boards such as [1] and [2] add an extra Ethernet port to Raspberry Pi (CM)5.
These typically use Realtek PCIe or USB Ethernet NICs. Include kmod-r8169 and
kmod-usb-net-rtl8152 by default to make it easy to configure LAN/WAN ports
with these parts on Raspberry Pi 5.

Because CM5 can fit in the same carrier boards as CM4, also ensure that both
devices have the same Ethernet NIC kmods.

[1]: https://www.waveshare.com/wiki/CM5-DUAL-ETH-MINI
[2]: https://www.waveshare.com/wiki/PCIe_TO_Gigabit_ETH_Board_(C)

Signed-off-by: Elbert Mai <code@elbertmai.com>
Link: https://github.com/openwrt/openwrt/pull/19384
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: a61ab43)

loongarch64: switch to Linux 6.12 by default

Use Linux kernel version 6.12 by default for loongarch64 target.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19980
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: c21d491)

mac80211: use https instead of http

Use CDN first, if fails, it will use https://mirror2.openwrt.org/sources

Signed-off-by: Andy Chiang <AndyChiang_git@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19979
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 9a02069)

kernel: improve mtk_eth_soc performance

- shrink data structures
- avoid unnecessary divisions
- support GSO fraglist on tx

Reapply with fixed patch

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 (commit: 19e9772)

mt76: update to Git HEAD (2025-09-09)

27ad37728c3f wifi: mt76: mt7996: Check phy before init msta_link in mt7996_mac_sta_add_links()
95c9b8099ede wifi: mt76: mt7996: Set EML capabilities for AP interface
08df8dd7b00b wifi: mt76: mt7996: Use proper link_id in link_sta_rc_update callback
15fa4e33ee8f wifi: mt76: mt7996: Enable MLO support for client interfaces
3400b1ba33be wifi: mt76: mt7925: add pci restore for hibernate
51a1c0a086c8 wifi: mt76: mt7921: Add 160MHz beamformee capability for mt7922 device
435e596914fa wifi: mt76: mt7996: Use proper link info in mt7996_mcu_add_group
d30faac3b645 firmware: update mt7996 and mt7992 firmware to 20250606
304226bc4552 wifi: mt76: mt7996: Fix mt7996_reverse_frag0_hdr_trans for MLO
7cf18f8ebbb8 wifi: mt76: mt7996: Add all active links to poll list in mt7996_mac_tx_free()
16090cb27d9f wifi: mt76: mt7996: Implement MLD address translation for EAPOL
a1c319500a53 wifi: mt76: mt7996: Temporarily disable EPCS
5f3ea4562fbf wifi: mt76: mt7921: Place upper limit on station AID
ef2468830f6d wifi: mt76: un-embedd netdev from mt76_dev
29bca0ca462b net: mediatek: wed: Introduce MT7992 WED support to MT7988 SoC
245f6ff460c8 wifi: mt76: Add reset_idx to reset_q mt76_queue_ops signature.
4a3a5a7d71a8 wifi: mt76: Remove q->ndesc check in mt76_dma_rx_fill()
d540538299f7 wifi: mt76: Differentiate between RRO data and RRO MSDU queues
d0217732f96e wifi: mt76: Do not always enable NAPIs for WED RRO queues
1df790839241 wifi: mt76: mt7996: Initial DMA configuration for MT7992 WED support
fca511f401e9 wifi: mt76: mt7996: Enable HW RRO for MT7992 chipset
8134055d3459 wifi: mt76: mt7996: Introduce the capability to reset MT7992 WED device
4f81d751b5de wifi: mt76: mt7996: Fix tx-queues initialization for second phy on mt7996
f559eef156fd wifi: mt76: mt7996: Fix RX packets configuration for primary WED device
6b518355fec6 wifi: mt76: mt7996: Enable WED for MT7992 chipset
13eb05fa4a43 wifi: mt76: mt7996: Introduce RRO MSDU callbacks
ac1bca49973b wifi: mt76: Add rx_queue_init callback
d82330a9d019 wifi: mt76: mt7996: Decouple RRO logic from WED support
0a32ae3cc23d wifi: mt76: Add mt76_dma_get_rxdmad_c_buf utility routione
6c902ccba889 wifi: mt76: mt7996: Add SW path for HW-RRO v3.1
f271ce48d73b mt76: mt7996: fix unsigned comparison
d48b221e39f1 wifi: mt76: mt7925: prevent NULL vif dereference in mt7925_mac_write_txwi
719cda7c9f18 wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_tx_check_aggr()
03b0c871630a wifi: mt76: mt7996: add missing NULL pointer check
91dcccebfe19 firmware: update mt7996/mt7992 firmware to 20250905
76401f5e2e05 mt76: update RRO patches to the latest version
7b4b6c844554 wifi: mt76: Convert mt76_wed_rro_ind to LE
0d6eaa417441 wifi: mt76: mt7915: fix mt7981 pre-calibration
015349622b0c wifi: mt76: mt7925: fix incorrect length field in txpower command
5776b3292908 wifi: mt76: mt7925: refine the txpower initialization flow
b50c633f9158 wifi: mt76: mt7996: support writing MAC TXD for AddBA Request
ea9998693579 wifi: mt76: mt7996: Add missing DMA sync for EAPOL frames
a4d6f193be22 wifi: mt76: mt7996: remove redundant per-phy mac80211 calls during restart
ffda4432654d wifi: mt76: mt7996: improve hardware restart reliability
a6559a003d1b wifi: mt76: mt7996: decrease timeout for commonly issued MCU commands

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 (commit: e401229)

kernel: backport patch to allow bpf fallback to interpreter

Deal with JIT failure more gracefully

Fixes: https://github.com/openwrt/openwrt/issues/19405
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 (commit: 20d761c)

realtek: cleanup mach include

A lot of definitions in the global mach include have been taken over
to the individual drivers. Only a few of the definitions are really
used nowadays. Remove all the unneeded lines.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19995
Signed-off-by: Robert Marko <robimarko@gmail.com>
 (commit: 76cfd5b)

kernel: r8168: add missing flags

PKG_MAKE_FLAGS is required when compiling r8168-rss

Signed-off-by: Andy Chiang <AndyChiang_git@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/20001
Signed-off-by: Robert Marko <robimarko@gmail.com>
 (commit: 5719d65)

ramips: switched TP-Link RE305 v1 to new partition layout

After trying to implement the gluon support for this device I ended up in a boot loop due to the usable amount of flash left. With this patch layout it uses the unused and empty flash space in the original partiton layout.
The version 3 of this device the RE365 share the same approach to have more usable space.

Signed-off-by: Steffen Förster <nemesis@chemnitz.freifunk.net>
Link: https://github.com/openwrt/openwrt/pull/18639
Signed-off-by: Sander Vanheule <sander@svanheule.net>
 (commit: ebd5e5f)

ramips: mt7621: set mac address in dts for DBDC

Support in mt76 has existed for quite a while. Use it.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19806
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 75c4d43)

ramips: e390ax: remove redundant 02_network MACs

These are already specified in DTS. Only thing missing is
label-mac-device.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19806
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: f565570)

mediatek: filogic: use NVMEM for EEPROM/precal on NWA50AX Pro

Convert NWA50AX Pro to use NVMEM framework for EEPROM/precal.

Signed-off-by: Zhi-Jun You <hujy652@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/19982
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 1f59ef6)

mediatek: filogic: use NVMEM for wifi macaddr on NWA50AX Pro

Convert NWA50AX Pro to use NVMEM framework for wifi macaddr.

Also remove the unused macaddr@a.

Signed-off-by: Zhi-Jun You <hujy652@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/19982
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 97fca42)

mediatek: filogic: fix fip partition size for Zyxel EX5601-T0

Fix incorrect "fip" partition size.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19968
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 6cf5ba9)

mediatek: filogic: Zyxel EX5601-T0 dts cleanup

Dts cleanup for Zyxel EX5601:
- duplicated code
- trailing zeros and whitespaces

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19968
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 5c57477)

mediatek: filogic: fix 5G MAC address for Zyxel EX5601

Currently 5G wireless interface MAC address is incorrect.
Fix by setting MAC address using Factory data.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19968
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: 9ed4d27)

mediatek: filogic: Add label wan and cpu for Zyxel EX5601-T0

Add labels wan and cpu for ethernet ports.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19968
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 (commit: f26260c)